Evenly Distributed: 120,000 lbs. In Any 16 ft. Load Base: 110,000 lbs.
High strength 100,000 psi min. yield; steel, cable roller with spherical bearings between gooseneck mainbeams at rear, pin pockets in front of roller; cable pickup eye with winch lug connection point behind first removable kingpin setting; removable plate between gooseneck mainbeams rear of kingpin settings to walk on; 4-beam design, 22 in. deep mainbeams, 18 in. deep sidebeams; 16, 28 and 40 in. kingpin settings; 120, 108 and 96 in. swing radius; landing gear - drop legs
Fixed, narrow type, with low arch profile; skid pipe at front of gooseneck
Main Deck Construction
Crossmembers: 24 in. centers, Aux outboard mainbeams on 12 in. centers; lightening holes in deck sidebeams; air pop-up roller each side 5 ft. in front of axle 1, outside mainbeams; load bearing rolling tail board at rear with spherical bearings, greaseable thru end cap, 2 sets greaseable overload bearings below, pin pockets in outside flange @ 45°; keyhole slots in outer flanges on 48 in. centers; 5 pin pockets each side on outside flange - 2 in. SCH160, 2-3/4 in. OD x 1-5/8 in. ID
2 in. apitong flooring, full width with floor screws
12V LED sealed light system
30,000 lb. air ride with automatic and manual controls
Spring parking brake on axle 2
4, 25,000 lb. capacity Air lift on axle 4 Spacing: 60 in.
Steel disc, hub piloted with outboard brake drums
20 Total Lash Rings: 10 on each side of deck; last axle to have axle stops to prevent crushing when loading
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.